Alpha HW110LC Table Saw: Switching from 115V to 230V Configuration

Created by Gabriel Izzo, Modified on Fri, 22 May at 4:40 PM by Gabriel Izzo

Alpha HW110LC Table Saw · Electrical Setup

Switching from 115V to 230V Configuration

Applicable Model

Alpha HW110LC-36 / HW110LC-36P (2HP)

⚠ Electrical Safety & Liability Disclaimer

Working with electrical systems can be hazardous and should be performed by a qualified individual such as a licensed electrician.

Disconnect the machine from power before performing any electrical work. Never work on live circuits.

Follow all applicable local electrical codes and regulations when converting or rewiring this equipment.

Harvey Industries is not responsible for any injury, damage, or loss caused by improper electrical modifications or installation. Improper wiring may result in electric shock, fire, personal injury, or damage to the equipment.

Overview

The Alpha HW110LC-36 ships configured for 115V operation with a NEMA 5-20P plug installed. It also includes a dedicated 230V switch, allowing the saw to be reconfigured for 230V operation if desired.

Required Changes for 230V Conversion

Replace the plug with a NEMA 6-20P.

Change the wall receptacle to a NEMA 6-20R.

Change the breaker from a single-pole to a double-pole breaker.

Rewire the motor for 230V operation per the wiring diagram in the manual.

Install the included 230V switch in place of the 115V switch.

User Manual — Wiring Instructions (Pages 16–19)

PDF

Alpha HW110LC-36(P) — Instruction Manual

harveyedu.com · 230V wiring diagrams on pages 16–19

↗

Video Tutorial — 115V to 230V Conversion