Below are the approximate packaging and dimensions information for the Alpha HW110LC-36(P). This information can be used as an estimate to reference when planning for transportation, loading or unloading of the equipment.
The packed unit including fence and overhead guard with rails standing up on the pallet is about - 37” x 38” x 75”(LxWxH).
The tallest point on the pallet would be the rails which are standing up, these are 75" tall and on top of the pallet it reaches about 81" tall. The next tallest box is for the overhead guard assembly at 51" then the main cabinet saw box is 40".
Typical Pallet Dimensions - 43-½” x 43-½” x 6”
The cast iron table top is 31-1/2" x 22-7/16" and the height of the main cabinet box, which is on its own smaller pallet on top of the main pallet, is about 34-1/2". The weight of the unit with all of the other accessories removed would be about 281lbs roughly.
This is an approximate value based on the total weight of 411lbs and subtracting the following weights for the other components:
Miter Gauge - 10lbs
Fence - 24lbs
Overhead guard- 10lbs
Rails - 51lbs
Left Wing and other included hardware - about 35 lbs
The cabinet weight can be even further reduced if needed by removing the cast iron main table top. Please make note of any factory placed shims that are located on the corner mounting points and it helps to mark or write down how many are stacked and which corner they are installed from the factory to reference for the re-installation. These are used for leveling the main table and need to be put back in the same configuration when re-installing the main table.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article