Alpha HW110LC-36(P) — 2HP Table Saw
2HP FAQ
Yes, both the Alpha HW110LC and HW110S series have overhead dust collection at the blade guard. There is also shroud underneath the table to help capture du...
Tue, 28 Jun, 2022 at 1:07 AM
The HW110LC comes with a NEMA 5-20P rated for 125 volts single phase 20amp.
Tue, 28 Jun, 2022 at 1:09 AM
Because the European safety regulations require the additional securing points for saw blades, our saws have this feature and our German made Leitz Destroye...
Tue, 28 Jun, 2022 at 12:57 AM
The Alpha HW110LC-36(P) has a cord length of approximately 6ft.
Tue, 28 Jun, 2022 at 1:05 AM
The Alpha HW110LC-36(P) is set for 115v(110v-120v) out of the box, and it also comes with a 230v(220v-240v) switch and the manual has instructions on re-wir...
Mon, 8 Aug, 2022 at 12:14 PM
On the HW110LC, the cast iron table is cabinet mounted. This means the main part of the cast iron table is bolted directly to the cabinet using 4 bolts (Cap...
Tue, 28 Jun, 2022 at 12:49 AM
Here is a link to a video demonstrating the process of replacing the Arbor Assembly on the HW110LC Table Saws. https://youtu.be/BtrQMJQeLas
Tue, 28 Jun, 2022 at 12:48 AM
When receiving/ installing your Alpha HW110LC-36, you will be required to remove a yellow shipping bar. On this bar there is a bolt that controls and holds ...
Wed, 28 Dec, 2022 at 8:53 AM
Cabinet dimensions: 20-1/4” x 19-5/8”(514×498 mm) 20-1/4″ from front of saw to back of saw. 19-5/8″ from side to side of the cabinet. If building ...
Tue, 28 Jun, 2022 at 1:03 AM
For the Alpha table saw, the infeed distance or distance from front table edge to the saw blade (at max height) is approximately 14" inches. Note:...
Thu, 29 Sep, 2022 at 2:04 PM