Harvey FAQ: What plugs are installed on Harvey machines?

Created by Hung Nguyen, Modified on Thu, 21 May at 4:54 PM by Gabriel Izzo

Harvey FAQ · Power & Electrical

What Plugs Are Installed on Harvey Machines?

Harvey machines ship with one of two NEMA plug types depending on the model and horsepower. Both are North American standard plugs — verify your shop's receptacle type matches before plugging in.

NEMA 5-20P

Single Phase · 125V · 20A

125V 20A

Default on the following Harvey machines:

Table Saws

HW110LC models (2HP)

Dual Voltage — 115V / 230V

The HW110LC is a dual voltage machine (115V / 230V) and comes pre-wired for 115V with the 115V power switch installed. A 230V Power Switch is included separately in the box for conversion — however, a NEMA 6-20P plug end is not included and must be sourced separately. Consult a licensed electrician when converting to 230V operation.

NEMA 6-20P

Single Phase · 250V · 20A

250V 20A

Default on the following Harvey machines:

Table Saws

HW110TC table saws (3HP)

HW110S table saws (4HP)

Band Saws

Ambassador C14 — 14″ Band Saw (3HP)

Alpha HW615 — 15″ Band Saw (3HP)

Alpha A-15 — 15″ Band Saw (3HP)

Dust Collectors

Gyro Air G-700 Dust Collector (2HP)

Gyro Air G-700 PRO Dust Collector (3HP)

Gyro Air G-800 Dust Collector (3HP)

Gyro Air G-800 PRO Dust Collector (3HP)

Gyro Air G-1000 — Three Phase / No Plug Installed

The Gyro Air G-1000 Dust Processor operates on three-phase power (380–480V) and does not come pre-wired with a plug end installed. Electrical connection must be completed by a licensed electrician in accordance with local electrical codes and the machine's wiring specifications.

Shapers

HW303 Shaper (3HP)

Wood Lathes

Turbo T-40 Lathe (1HP)

Turbo T-60S Lathe (2HP)

NEMA 5-20P vs NEMA 6-20P — Photo Comparison

NEMA 5-20P vs NEMA 6-20P plug comparison photo

If your shop's receptacle does not match the plug on your machine, consult a licensed electrician to install the correct receptacle or adapt the circuit. Do not use unrated adapters. For further questions about power requirements, please contact our support team.

For questions about power requirements or electrical setup for your Harvey machine, please contact our support team.