Alpha HW110S-36/52(P) — 4HP Table Saw
All newer designs of the HW110S follow the European style of the switch. The newer design of the switch are actually more reliable than the older paddle swi...
Wed, 19 Oct, 2022 at 10:54 AM
Yes, both the Alpha HW110LC and HW110S series have overhead dust collection at the blade guard. Also, there is a shroud underneath the table to help capture...
Tue, 28 Jun, 2022 at 1:25 AM
Yes, the EW-8365 and EWP-8365 cast iron extension wings does have rib to support the table! It should look like this:
Tue, 28 Jun, 2022 at 1:41 AM
Distance from front edge of cast iron table to arbor center (middle of blade): 19″ (approx.) Distance from front edge of cast iron table to front of blade:...
Tue, 28 Jun, 2022 at 1:20 AM
To install a saw blade on an Alpha HW110S, you’ll need to use the two supplied wrenches (24mm & 27mm) that comes with the saw. Use one wrench to grab...
Tue, 28 Jun, 2022 at 1:22 AM
**Capacitor Safety Reminder** As with any electrical device, disconnect the power to the motor before servicing it and discharge the capacitors before h...
Wed, 28 Sep, 2022 at 3:05 PM
When setting up the front rail of an Harvey Alpha table saw, it is best to raise up the rail to the point where the “L” portion of the rail bracket meets th...
Tue, 28 Jun, 2022 at 1:37 AM
The Belt that comes installed on the HW110S is a 330J9 gates belt available at the link here: https://beltpalace.com/330j9.html
Tue, 28 Jun, 2022 at 1:25 AM
A dovetail table saw is part of the trunnion design that controls the elevation of the blade. The “dovetail” of the trunnion assembly helps keep the blade i...
Tue, 28 Jun, 2022 at 1:40 AM
The Arbor Speed for the HW110S 4HP Table Saw is 4800 RPM.
Tue, 28 Jun, 2022 at 1:17 AM