Should I use the stand pads for the C14 and HW615 bandsaws with the MB-600 Mobile Base?

Created by Gabriel Izzo, Modified on Wed, 7 Dec, 2022 at 2:28 PM by Gabriel Izzo

If you are planning to position either the Ambassador C14 or the Alpha HW615 band saws on the MB-600 Mobile Base, the stand pads would be optional and it may provide a more solid setting to remove or not install the stand pads, and place the saw directly on top of the MB-600 so that the base of the machine sits flat against the cut panel for the MB-600 Mobile Base. 


If using a third-party mobile base option that goes around the edge of the base of the machine, and does not have a flat section in the center connecting the corners/casters, you may need to remove the stand pads for it to rest on the lip of the mobile base correctly. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article