Harvey Alpha Series Table Saws: Infeed Distances to the Blade & Arbor

Created by Hung Nguyen, Modified on Wed, 27 May at 3:05 PM by Gabriel Izzo

Harvey Alpha Series Table Saws · Specifications

Infeed Distances to the Blade & Arbor

Overview

Reference measurements for the infeed distance on Harvey Alpha Series table saws. These are useful when planning jig setups, featherboard positioning, or outfeed table alignment. All measurements are taken with the blade at full height using a 254 mm (10″) blade.

Infeed Distance Specifications

Front Edge of Cast Iron Table to Arbor Center (Blade Midpoint)

~19″ Approximate distance from the front edge of the cast iron table to the center of the arbor (blade midpoint).

Front Edge of Cast Iron Table to Front Tip of Blade

~13.75″ Approximate distance from the front edge of the cast iron table to the front tip of the blade.

Notes

Measurements are based on a fully raised blade.

Blade diameter used for reference: 254 mm (10″).

Using smaller diameter blades will increase the infeed distance.

All distances are approximate and intended for reference purposes only.

For questions about infeed distances or shop layout, please contact our support team.