Gyro Air Series: RC-800/1000 Remote Control Manual

Created by Gabriel Izzo, Modified on Mon, 1 Jun at 9:46 AM by Gabriel Izzo

Gyro Air Series · RC-800 / RC-1000 · Remote Control

RC-800/1000 Remote Control — Instruction Manual

Applicable Models

Gyro Air G-800 Remote — Siemens VFD · no separate receiver · see Siemens manual below

Gyro Air G-800 Remote/Receiver — Delta MS300 VFD · with receiver · see Delta manual below

Gyro Air G-1000 Remote/Receiver — Delta MS300 VFD · with receiver · see Delta manual below

Siemens vs Delta — Key Differences

Siemens VFD (legacy): Remote uses DIP switches for pairing. The receiver is built into the control unit — no separate receiver unit.

Delta MS300 VFD (current): Remote uses SYNC buttons for pairing. Comes with a separate receiver unit.

Instruction Manual — Siemens VFD Version

G-800 · Legacy Siemens models · DIP switch remote

Instruction Manual — Delta MS300 VFD Version

G-800 & G-1000 · Current models · SYNC button pairing

For further assistance with RC-800/1000 remote pairing or setup, please contact our support team.

Attachments (2)

(Siemens)G800_1000 Remote Control instruction(Siemens）.pdf
1.46 MB

(Delta)G800_1000 Remote Control Instruction Manual.pdf
3.31 MB