NEMA 5-15 is only rated for 15 amps, which will not suffice for the Alpha HW110LC table saw as you will need 20 amps. The HW110LC draws up to 16 amps upon startup of the saw, which could trip the circuit breaker.
In order to power this saw, a NEMA 5-20 amp outlet rated at 110 volts and 20 amps is required, which is the type of plug that comes with the saw. This information can be found directly on our website.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article