Gyro Air Series: RC-700 Remote Control & Receiver - (Siemens VFD Models Only)

Created by Hung Nguyen, Modified on Fri, 16 Aug at 10:07 AM by Gabriel Izzo

Information for the following models:

  • Gyro Air G700 Dust Collector Remote/Receiver Kit (OLD VERSION ONLY - Siemens VFD without receivers)


NOTE: 

  • All later models of G700 Dust Collectors come with the remote & receiver INCLUDED.


For receivers that use ZHZCLL relays ONLY: 

  • There will be an additional wire connecting V+->COM1 which sends the 24v voltage to the communication terminal which is connected to the NO1 terminal so when connecting the receiver using the 3-wire configuration it will have the 24v wire from the machines main terminal block and the jumper wire connected on the V+ terminal as shown below. 



Instruction Manual:



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article