Gyro Air G-700: Inlet Location

Created by Gabriel Izzo, Modified on Tue, 19 May at 3:26 PM by Gabriel Izzo

Gyro Air G-700 · Specifications

Inlet Location

Applicable Model

Gyro Air G-700 Dust Processor

The position of the 6" inlet is shown in the diagram below. The center of the inlet is located at the following measurements from the machine's reference edges:

From the left 10.5"

Off the ground 12"

Inlet diameter 6"

Inlet Location Diagram

G-700 — 6" Inlet Center Position

Have questions about ducting or hose connections? Please contact our support team.