iVAC Switch's current method to control the G700 products is through the use of a new product called the MSCA-RC.
This new iVAC switch connects to a compatible remote and provides all the features of the iVAC Pro Series iVAC tools and accessories. This solution is plug and play, with no wiring required. To obtain the MSCA-RC and more information on configuration, please contact iVAC Switch's Customer Support using the link below:
https://www.ivacswitch.com/contact-us/
If you are using iVAC MSC-DEC then please refer to the installation information and attachments below:
Per iVac Recommendations:
This is the list of required products for your setup:
MBG-04, 4" Metal Blast gates(for 4" duct)
MBG-06 , 6" Metal Blast gates(for 6" duct)
Ivac Remote
MSC -DEC
Attached are the installation instructions and a drawing of how you would address the remotes and gates.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article