Turbo T-40 Wood Lathe: Leg Mounting Bolt Specifications (CI-40 Cast Iron Legs)

Created by Hung Nguyen, Modified on Wed, 20 May at 6:05 PM by Gabriel Izzo

Turbo T-40 Wood Lathe · Specifications

Leg Mounting Bolt Specifications — CI-40 Cast Iron Legs

Applicable Model

Harvey Turbo T-40 Wood Lathe — CI-40 Cast Iron Leg Set

To install the CI-40 cast iron leg set to the T-40 lathe, the following hardware specifications apply:

Mounting Bolt Specifications

Specification	Value
Bolt Type	Socket Head Cap Screw
Thread Size	M10 × 1.5
Thread Length	30 mm
Grade	8.8 (High-strength)
Quantity	8 bolts (4 per leg)

Ensure all bolts are fully tightened and that mounting surfaces are properly aligned during installation. Use the correct grade 8.8 bolts — do not substitute with lower-grade fasteners.

CI-40 Leg Mounting Bolt — Reference Photo

CI-40 cast iron leg mounting bolt reference photo

For replacement hardware or installation assistance, please contact our support team.