Harvey Industries International, Inc.

Here's a quick video to help guide you through the process! For access to the manual outlined in the video, please see the link below.  Link to Man...

The front crankshaft controls elevation of the blade The table slides back and forth to create the motion of “cutting” At the back of the blade there’s a...

(Reference) Page 9 of manual (Section 4.4; Fig. 5) There’s 5 screws on the orange blade holder (spine) that need to be loosen (not removed completely)...

Improper Equipment Setup - Tuning and Calibration of the JMP Improper setups - Workpiece not clamped correctly, blade pitch incorrect Forcing cuts o...

(Reference) Page 12 Section 5 of manual for instructions. Set the trunnion at 90* degree and check to ensure squared with table Have to loosen t...

JMP Precison Fence is better for repeatability of cuts. It has micro adjustments for making precise cuts as well. Tenon miter jig attachment hooks onto...