Jointmaker Pro: Blade Replacement

Created by Sam V, Modified on Wed, 27 Mar 2024 at 02:06 PM by Gabriel Izzo

  • (Reference) Page 9 of manual (Section 4.4; Fig. 5)

  • There’s 5 screws on the orange blade holder (spine) that need to be loosen (not removed completely) to allow the blade to be removed. The manual recommends loosening the Grey Saw Guide (or silver blade guide) to make it easier to take the blade out and install, but not necessary.

**DO NOT REMOVE BLACK GUIDE** because it is used for reference. The blade rests up against the black guide and ensures it’s parallel with the orange spine.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article