Harvey Industries International, Inc.

To remove the G700 from the pallet, please perform the following steps: Open the front door with the two knobs on the front, then remove the dust catch...

Since Title To & Risk of Loss for goods passes to the customer upon acceptance of the goods from the carrier, it is critical that the customer inspect t...

The length of the rails for the Alpha HW110S-52(P) and HW110TC-52(P) is 85 inches.  The length of the rails for the Alpha HW110LC-36(P) and HW110S-36(P)...

Specially priced sales, limited deals, and flash sales policy cannot be combined with other sales or special discounts, unless specifically noted by the sal...

What is TiN (Titanium Nitride)? What are the benefits? TiN (Titanium Nitride) is a hard ceramic material used in coating for other metal to help improve th...

These are the dimensions of the T-Tracks/T-Slots : 3/4”(W) x 3/8”(D) x 1"(Width at the T).

The acceptable runout tolerance at the arbor is less than 0.001" as any runout could affect a cut or cause blade to wobble. Note that blades do have a ...

The blade arbor diameter for the Harvey table saws are 5/8" arbor. This is a common arbor diameter and should accept most 10" table saw blades...

NEMA 5-20P Rated for up to 125V  Rated for up to 20A Default wiring for the following Harvey machines: Table Saws: HW110LC models table saws (2HP) ...

Please see the below diagram that shows the HW110TC-52 dimensions for both the overall and the distance going from the cabinet to the extension table legs. ...