Improper Equipment Setup - Tuning and Calibration of the JMP
Improper setups - Workpiece not clamped correctly, blade pitch incorrect
Forcing cuts or being too aggressive (damaging blades; broken tooth)
Not setting the Precision Fence up correctly (example blue flip stop knob needs to be lowered instead of raised up to secure the flip stop)
Practice — More difficult and higher learning curve for this tool
What are some typical JMPv2 application mistakes? Print
Created by: Samantha V.
Modified on: Thu, 10 Nov, 2022 at 1:45 PM
Did you find it helpful? Yes NoSend feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.