To remove the G700 from the pallet, please perform the following steps:


  1. Open the front door with the two knobs on the front, then remove the dust catch bin from the inside of the machine. 
  2. If you look down, there are 4 lag bolts that are holding the machine to the pallet. Remove these lag bolts. 
  3. Raise the feet with an open end wrench(if necessary). 
  4. Remove the cardboard edges from the pallet, then roll the G700 off of the pallet with the wheels on the bottom (Filter side first, as it is much lighter) then scoot the motor side off. 

**Note: This job is easier to do with two people, so try to get someone to help.**